Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 34 / 392

10.
Install the assembly in your rack, using the M6 screws that came with the rack-
mount kit .
11. Complete the electrical installation.
Side-by-Side Rack-Mount Installation
With the optional Orolia 22/05 rack-mount kit (P/N 1211-0000-0701 ), two GSG units can
be installed side-by-side in one 19-inch rack (2U). The kit comprises:
4 x Bracket, rear (1211-1000-0706) [Item 1 ]
2 x Ear, rack (1211-1000-0714) [Item 2 ]
1 x Hinge, right half (1211-1000-0709) [Item 3 ]
1 x Hinge, left half (1211-1000-0709) [Item 4 ]
8 x Screw, oval head phil, M5x10mm (HM25R-D5R8-0010) [Item 5 ]
2 x Screw, pan head phil, M4x8mm (HM10R-04R0-0008) [Item 6 ]
1 x Spacer, Hex, M4x16 (HM50R-04R0-0016) [Item 7 ]
Figure 2-5:
Dual rack-mount assembly
In order to prepare the GSG units for rack mount installation, the housings needs to be
opened, in order to remove the bottom feet (otherwise the assembly will not fit in a 2U
slot.)
18 User Manual GSG-5/6 Series Rev. 27
2.3 Mechanical Installation