Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 319 / 392

Command Syntax
SOURce:SCENario:DUPlicate <TIME>,<satID>,<decimal>,<decimal>, <decim-
al>,<decimal>,<decimal>,<integer>,<decimal>,<decimal>, <integer>[,<sa-
tID>]
Parameter
TIME – As TIME argument only IMMediate is supported.
satID – Satellite identifier of the satellite to duplicate
Decimal [-999.999,999.999] – Range offset in meters
Decimal [-99.999,99.999] – Range Change rate in meters/interval
Decimal [0.0,600.0] – Range Interval in seconds
Decimal [-99.9999,99.9999] – Doppler offset in meters
Decimal [-99.9999,99.9999] – Doppler Change rate in meters/sec/interval
Integer [0,600] – Doppler Interval in seconds
Decimal [-30.0,6.0] – Power offset in meters
Decimal [-30.0,0.0] – Power Change rate in dB/interval
Integer [0,600] – Power Interval in seconds
satID – Optional satellite identifier for which satellite that is to be replaced by the duplicate
Examples
SEND:
SOURce:SCENario:DUPlicate IMM,G3,1.0,2.0,3.0,4.0,5.0,6,7.0,-8.0,9,G9
6.3.3.85 SOURce:SCENario:DUPlicate[n]
Function
This command creates a duplicate of the satellite in given channel number (the second
argument) using the provided multipath parameters. The parameters include the Duplicate
Satellite Channel Number, Range Offset, Range Change, Range Interval, Doppler Offset,
Doppler Change, Doppler Interval, Power Offset, Power Change and Power Interval.
When the scenario is running, the optional argument n can be used to specified the target
channel where the duplicate will be placed. If the target channel already contains a satellite,
that satellite is disabled and replaced by the duplicate.
6.3 Command Reference
User Manual GSG-5/6 Series Rev. 27 303