Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 143 / 392

2.
Click the Start button to start the transfer. The unit will first transfer the file, and
then update the firmware.
Uploading a Scenario
1.
In order to upload a scenario , first ensure that the scenario file (.
scen
file) and any
trajectory, event, or navigation file associated with the scenario are stored in the Stu-
dioView repository. By default this location is:
C:\Users\username\Documents\Spectracom\GSG StudioView\Repository
Note: The username location may depend on your version of the Win-
dows operating system you are using.
2.
In the StudioView Uploader window, click Select file for uploading , and nav-
igate to the scenario file in the repository.
3.
Click the Start button to start the upload. The software will automatically upload the
scenario file as well as any trajectory, event, or navigation file associated with that
scenario, and place the files in the proper locations in the GSG.
4.9.6 Transferring Files With StudioView
If there is a need to transfer individual files from your StudioView PC to a connected GSG
or vice versa, StudioView's File Manager is the tool of choice.
Note: Note that for uploading scenarios the Uploader (see "Uploading Stu-
dioView Files" on page 125 ) is the preferred tool over the File Manager ,
since the Uploader automatically uploads all files belonging to a scenario.
Transferring a File using the StudioView File Manager
1.
Open the File Manager tool by navigating to Tools > File Manager , or click .
4.9 Studioview Tasks
User Manual GSG-5/6 Series Rev. 27 127