Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 126 / 392

To navigate between fields , first press the UP/DOWN arrow keys to select the field
label. Then press enter or the RIGHT arrow key, to begin editing the values. To move to
the next field on the same line, press enter , or the RIGHT arrow key. To move to the pre-
vious field on the same line, press the LEFT arrow key.
To proceed to the next View , press view .
To finish editing , press start , exit , or cancel . (With start and exit , you will be given the
choice to save the scenario under a different name.)
Second Configuration View
The second Scenario Configuration View allows you to configure the Trajectory ,
Ephemeris data, Event data and Leap Second simulation ( LS ).
Also accessible from this View are:
The Antenna submenu, which allows the configuration of the Antenna model ,
Lever arm , and Elevation mask .
The Advanced submenu, which provides access to Multipath and Interference sig-
nals . Also, the Base station (RTK option) can be turned on, and output messages
defined. Environment models can be changed to ‘set’ which allows the selection of
Environment and Vehicle models (created with the third-party tool SketchUp (a
Technical Note about Vehicle Modeling using Sketchup is available upon request).
The Atmospheric model submenu.
Note: Some of the functionality shown is optional. For more information on
GSG Options, see "GSG Series Model Variants and Options" on page 203 .
Figure 4-2:
Scenario Configuration View 2/3
110 User Manual GSG-5/6 Series Rev. 27
4.1 Working with Scenarios