Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 115 / 392

3.6.3.1 Network Configuration
To access the Network configuration view, navigate to Options > Interface and Refer-
ence > Select Interface Type : Ethernet . Highlight the menu item Network , and press
enter ; the Network configuration screen will be displayed:
IP Configuration
Figure 3-32:
Static IP address configuration
In the Network configuration screen, you can configure GSG either to obtain an IP
address automatically from a DHCP server, or you can specify a static IP address.
To specify a static IP address manually, you must provide:
the IP address
the network mask
and the gateway .
Note: In order for the ephemeris download to work, the correct DNS
address must specified, either by setting Options > Interfaces and Refer-
ence > Network > Obtain IP autom. = Yes , or—when using a static IP con-
figuration—by manually entering the correct DNS address.
If in doubt, consult your network administrator about the IP address configuration.
NTP Configuration
Under Network configuration , you can also—among other things—enable the current
time, as delivered by an NTP server, to be used as the Start Time, by setting an NTP Server
address.
1.
To access the Network configuration view, navigate to Options > Interface and
Reference > Select Interface Type : Ethernet . Then highlight the menu item Net-
work , and press enter ; the Network configuration screen will be displayed. High-
light the menu item NTP server , and press enter .
2.
Enter the IP address of the NTP server on your network.
3.6 "Options" Menu
User Manual GSG-5/6 Series Rev. 27 99