Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 105 / 392

you modified the power configuration, it will be saved with all other settings when the unit
is turned off.
To configure signals power:
1.
Navigate to Options > Transmit Power .
2.
Adjust the GPS L1C/A band Ref. power . The power is specified in dBm . The sup-
ported range is: Max. -65 dBm … Min. -160 dBm.
3.
Select Signals power configuration to open the corresponding menu.
4.
Select the desired constellation, and adjust the power for each signal type sup-
ported by this constellation.
Note: When changing the power setting for a signal type, the Refer-
ence Power (absolute power level of GPS L1 C/A) and Relative
Power offsets for all the remaining signal types will remain
unchanged.
Figure 3-25:
Signals power configuration menu
Use the format key to switch between the absolute or relative mode of displaying/editing
power. When the Absolute Power mode is active and Reference Power is changed, the
Relative Power offsets will stay unchanged, so that absolute powers will be “shifted”
together with the Reference Power .
Default Power Configurations
Signal name
Orbit type
name
Absolute power
(dBm)
Relative power
(dBm)
GPSL1CA (reference) -128.5 0
3.6 "Options" Menu
User Manual GSG-5/6 Series Rev. 27 89