OR-CR-231
Instruction
SPECIFICATION:
Power source: 220-240V/AC Power Frequency: 50Hz
Rated Current: 20A Ambient Light: <2-100LUX (adjustable)
Working Temperature: -20~+40
℃
Working Humidity: <93%RH
INSTALLATION
:
Switch off the power.
The product should be installed in a trough.
Pull the plastic button at the back of the product, and then put the product into the trough.
After that, push the plastic button to lock the product in the trough.(refer to Figure1)
Connect the wire with the product as per the Connection-wire diagram
Loose the four screws on the cover and unload the cover(refer to Figure2)
According to the correct installation place. Install the product with the enclosed inflated
screws(refer to Figure3)
Install back the cover. Switch on the power, and then test it. (refer to Figure4)
Figure1 Figure2 Figure3 Figure4
INCORRECT CORRECT
