ORKEL MP2000-X, Руководство пользователя

Страница: 109 / 137

10.5 INPUTS AND OUTPUTS
10.5.1 IO block 1
Loc. ID Description Type Hi Mid Low
X1.1 V02 Chamber open DO ·1 ·2
X1.2 V03 Chamber close DO ·1 ·2
X1.3 V04 Wrapper bypass off DO ·1 ·2
X1.4 ---------- NOT IN USE ----------
X1.5 ---------- NOT IN USE ----------
X1.6 V36 Elevator & door speed FB FB ·2
X1.7 V36 Elevator & door speed PWM ·1
X1.8 V40 Net brake release DO ·1 ·2
X1.9 ---------- NOT IN USE ----------
X1.10 ---------- NOT IN USE ----------
X1.11 ---------- NOT IN USE ----------
X1.12 ---------- NOT IN USE ----------
X1.13 ---------- NOT IN USE ----------
X1.14 V08 Net knife cut DO ·1 ·2
X1.15 V17 Net feed rollers open DO ·1 ·2
X1.16 V18 Net feed rollers close DO ·1 ·2
X1.17 V19 Net feed motor DO ·1 ·2
X1.18 V35 Air cleaning, door (OPT) DO ·1 ·2
X1.19 S17 Chamber opened DI Bk Bl Br
X1.20 S18 Chamber closed DI Bk Bl Br
X1.21 ---------- NOT IN USE ----------
X1.22 ---------- NOT IN USE ----------
X1.23 Sensor supply DO X <----> X
10.5.2 IO block 2
Loc. ID Description Type Hi Mid Low
X2.1 V01 Sub conveyor bypass DO ·1 ·2
X2.2 V37 S.conveyor & F.hopper speed PWM ·1
X2.3 V37 S.conveyor & F.hopper speed FB FB ·2
X2.4 V32 Chamber speed FB FB ·2
X2.5 V32 Chamber speed PWM ·1
X2.6 V25 Feed hopper on DO ·1 ·2
X2.7 V39 Elevator bypass DO ·1 ·2
X2.8 V24 Sub conveyor on DO ·1 ·2
X2.9 V51 Run Feed hopper DO ·1 ·2
X2.10 V52 Run flip DO ·1 ·2
X2.11 ---------- NOT IN USE ----------
X2.12 S41 Elevator load (pressure) AI Wh Br
X2.13 ---------- NOT IN USE ----------
10 ELECTRICS 109