Orion VII EPA10, Руководство оператора

Страница: 69 / 90

Wheelchair Ramp System
Page 63
WHEELCHAIR RAMP SYSTEM
An electro-hydraulically operated
wheelchair ramp is located in the
front door step area. The ramp
platform pivots around a hydraulic
actuator mounted directly to the
ramp at the aft pivot point.
The ramp control switch is located
on the front instrument panel beside
the kneeling system switch.
Ramp Malfunction
If a ramp malfunction occurs, the
ramp can be operated manually by
using a T-handle key, located in the
driver’s barrier compartment. Insert
the hook on the T-handle key into
ramp channel and lift ramp upward.
Grab hold of the handle strap on the
ramp and slowly lower the ramp into
position. To stow the ramp, use the
grab handle and lift the ramp back
into the stow position. Operation
CAUTION !
The vehicle ramp system is
designed as a passenger access
feature and not as a load lifting
device. Do not attempt to lift any
object with the ramp. Doing so
can result in damage the ramp.
WARNING
Ensure boarding passengers
stand clear and wait until the
ramp has been completely
deployed before entering the
vehicle. Allow passengers to
board safely before placing the
ramp control switch in the STOW
mode. Failure to do so may result
in personal injury.