ORiNG IES-3062 Series, Руководство пользователя, Страница: 99 / 107

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp 89
no snmp-server host
[Host-address]
G Remove the SNMP
server host.
switch(config)#no snmp-server
192.168.10.50
6.11 Commands Set List—Port Mirroring command set
IES-3080 / IES-3062
SERIES Commands
Level Description Example
monitor rx G Set RX destination
port of monitor
function
switch(config)#monitor rx
monitor tx G Set TX destination
port of monitor
function
switch(config)#monitor tx
show monitor P Show port monitor
information
switch#show monitor
monitor
[RX|TX|Both]
I Configure source port
of monitor function
switch(config)#interface fastEthernet
2
switch(config-if)#monitor RX
show monitor I Show port monitor
information
switch(config)#interface fastEthernet
2
switch(config-if)#show monitor
no monitor I Disable source port of
monitor function
switch(config)#interface fastEthernet
2
switch(config-if)#no monitor
6.12 Commands Set List—802.1x command set
IES-3080 / IES-3062
SERIES Commands
Level Description Example
8021x enable G Use the 802.1x global
configuration
command to enable
802.1x protocols.
switch(config)# 8021x enable
8021x system radiousip
[IP address]
G Use the 802.1x
system radious IP
switch(config)# 8021x system
radiousip 192.168.1.1