ORiNG IES-3062 Series Скачать руководство пользователя страница 54

Страница: 54 / 107

IES-3080 / IES-3062 SERIES User’s Manual

ORing Industrial Networking Corp

5.1.6 DHCP Server

5.1.6.1 DHCP Server – Setting

The system provides with DHCP server function. Enable the DHCP server function, the

switch system will be a DHCP server.

DHCP Server Configuration interface

The following table describes the labels in this screen.

Label

Description

DHCP Server

Enable or Disable the DHCP Server function. Enable – the switch will

be the DHCP server on your local network

Start IP Address

The dynamic IP assign range. Low IP address is the beginning of the

dynamic IP assigns range. For example: dynamic IP assign range is

from 192.168.1.100 to 192.168.1.200. 192.168.1.100 will be the Start

IP address.

End IP Address

The dynamic IP assign range. High IP address is the end of the

dynamic IP assigns range. For example: dynamic IP assign range is

from 192.168.1.100 to 192.168.1.200. 192.168.1.200 will be the End

IP address

Subnet Mask

The dynamic IP assign range subnet mask

Gateway

The gateway in your network.

DNS

Domain Name Server IP Address in your network.

Lease Time

(Hour)

It is the period that system will reset the assigned dynamic IP to ensure

the IP address is in used.

Apply

Click “

Apply

” to set the configurations.

Содержание IES-3062 Series












































































































Результаты поиска

Содержание IES-3062 Series

Отзывы:

ORiNG IES-3062 Series, Руководство пользователя, Страница: 54 / 107

Результаты поиска

Содержание IES-3062 Series

Отзывы: