ORiNG IES-3062 Series Скачать руководство пользователя страница 53

Страница: 53 / 107

IES-3080 / IES-3062 SERIES User’s Manual

ORing Industrial Networking Corp

The following table describes the labels in this screen

COS/802.1p

COS (Class Of Service) is well known as 802.1p. It describes

that the output priority of a packet is determined by user

priority field in 802.1Q VLAN tag. The priority value is

supported 0to7.COS value map to 4 priority queues: High,

Middle, Low, and Lowest.

COS Port Default

When an ingress packet has not VLAN tag, a default priority

value is considered and determined by ingress port.

Apply

Click “

Apply

” to set the configurations.

Help

Show help file.

5.1.5.4 TOS/DSCP

TOS/DSCP interface

The following table describes the labels in this screen

TOS/DSCP

TOS (Type of Service) is a field in IP header of a packet. This

TOS field is also used by Differentiated Services and is called

the Differentiated Services Code Point (DSCP). The output

priority of a packet can be determined by this field and the

priority value is supported 0to63. DSCP value map to 4

priority queues: High, Middle, Low, and Lowest.

Apply

Click “

Apply

” to set the configurations.

Help

Show help file.

Содержание IES-3062 Series












































































































Результаты поиска

Содержание IES-3062 Series

Отзывы:

ORiNG IES-3062 Series, Руководство пользователя, Страница: 53 / 107

Результаты поиска

Содержание IES-3062 Series

Отзывы: