ORiNG IES-3062 Series, Руководство пользователя, Страница: 105 / 107

IES-3080 / IES-3062 SERIES User’s Manual
ORing Industrial Networking Corp 95
sntp timezone
[Timezone]
G Set timezone index,
use “show sntp
timzezone” command
to get more
information of index
number
switch(config)#sntp timezone 22
show sntp P Show SNTP
information
switch#show sntp
show sntp timezone P Show index number of
time zone list
switch#show sntp timezone
no sntp G Disable SNTP
function
switch(config)#no sntp
no sntp daylight G Disable daylight
saving time
switch(config)#no sntp daylight
6.16 Commands Set List—O-Ring command set
IES-3080 / IES-3062
SERIES Commands
Level Description Example
Ring enable G Enable O-Ring switch(config)# ring enable
Ring master G Enable ring master switch(config)# ring master
Ring couplering G Enable couple ring switch(config)# ring couplering
Ring dualhoming G Enable dual homing switch(config)# ring dualhoming
Ring ringport
[1st Ring Port] [2nd Ring
Port]
G Configure 1st/2nd
Ring Port
switch(config)# ring ringport 7 8
Ring couplingport
[Coupling Port]
G Configure Coupling
Port
switch(config)# ring couplingport 1
Ring controlport
[Control Port]
G Configure Control Port switch(config)# ring controlport 2
Ring homingport
[Dual Homing Port]
G Configure Dual
Homing Port
switch(config)# ring homingport 3
show Ring P Show the information
of O-Ring
switch#show ring
no Ring G Disable O-Ring switch(config)#no ring
no Ring master G Disable ring master switch(config)# no ring master
no Ring couplering G Disable couple ring switch(config)# no ring couplering
no Ring dualhoming G Disable dual homing switch(config)# no ring dualhoming