Features
High Speed Air Connectivity: WLAN interface support up to 300Mbps
link speed
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/
WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
Support X-Roaming < 100 ms
Support wireless load balance
Support AP/Client/Bridge/AP-Client Mode
Switch Mode Supported: Daisy Chain support to reduce usage of
switch ports
Dual redundant Ethernet port support redundant mode (Recovery
time < 10ms)
Secured Management by HTTPs
Fully Compliant with IEEE802.3af (Power Device at ETH2, PoE Models)
Wireless connecting status monitoring
Event Warning by Syslog, Email, SNMP Trap, Relay output and Beeper
1KV isolation for PoE P.D. port of IAP-620+
Rigid IP-30 housing design
DIN-Rail and Wall-mount enabled
are reliable 802.11 a/b/g/n WLAN Access
Point with 2 ports LAN. It supports 802.1X and MAC filters for security
control.
It can be configured to operate in AP/Bridge/Repeater/AP-
Client mode. You are able to configure
by
WEB interface via LAN port or WLAN interface.
provide dual Ethernet ports in switch mode, so that you can
use Daisy Chain to reduce the usage of Ethernet switch ports. In
addition,
also provides P.D. feature on ETH2 which is fully
compliant with IEEE802.3af PoE P.D. specification. Therefore,
are one of the best communication solutions for
wireless applications on the industrial network.
IAP-620 / IAP-620+ series
IAP-620 / IAP-620+ series
IAP-620 / IAP-620+
series
IAP-620+
IAP-620
/ IAP-620+ series
IAP-620/IAP-620+ can also be configure through ORing’s Windows utility
Open-Vision
Step 1: Open the commander and click ”Discover”, the AP devices will
show on the list.
Step 2: Choose your access point, and it will show the AP function tree.
Simultaneity, you can login and then set the AP.
Introduction
Open-Vision
Q I G
Version 1.1
Q
uick
I
nstallation
G
uide
ORing Industrial Networking Corp.
Quick Installation Guide
IAP-620 Series
Wireless
IAP-620 Series
Industrial Wireless LAN Access
Point
ACCESS POINT
I N D U S T R I A L
1907-2-29-IAP620-0
Specifications
ORing WLAN Access Point
Model
IAP-620
Physical Ports
WLAN Interface
Power Indicator
Fault
Red for Ethernet link down or power down indicator
10/100Base-T(X) RJ45 port
indicator
Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Power
Redundant Input power
Power consumption(Typ.)
Dual DC inputs. 12~48VDC on 6-pin terminal block
6 Watts
Overload current protection
Reverse polarity protection
Present
Present
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
54.1(W) x 106.1(D) x 145.4(H) mm (2.13 x 4.18 x 5.72 inch.)
Weight (g)
800 g
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
10/100Base-T(X) Ports in RJ45
Auto MDI/MDIX
2
LED Indicators
AP/Client/Bridge/AP-Client
Operating Mode
IEEE802.11a/n: OFDM with BPSK, QPSK, 16QAM, 64QAM
IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM
Modulation
802.11b: 1/2/5.5/11 Mbps;
802.11a/g: 6/9/12/18/24/36/48/54 Mbps
802.11n(40MHz): UP to 300 Mbps
Transmission Rate
802.11a: 13dBm 1.5dBm
802.11b: 16dBm 1.5dBm
802.11g: 14dBm 1.5dBm
802.11n(2.4G@20MHz): 13dBm 1.5dBm
802.11n(2.4G@40MHz): 12dBm 1.5dBm
802.11n(5G@20MHz): 12dBm 1.5dBm
802.11n(5G@40MHz): 12dBm 1.5dBm
±
±
±
±
±
±
±
Transmit Power
802.11a: -68dBm 2dBm@54Mbps
802.11b: -82dBm 2dBm@11Mbps
802.11g: -68dBm 2dBm@54Mbps
802.11n(2.4G@20MHz, MCS15): -64dBm 2dBm
802.11n(2.4G@40MHz, MCS15): -60dBm 2dBm
802.11n(5G@20MHz, MCS15): -64dBm 2dBm
802.11n(5G@40MHz, MCs15): -60dBm 2dBm
±
±
±
±
±
±
±
Receiver Sensitivity
2 x External reverse SMA type antenna connector
Antenna Connector
America/FCC:
2.412~2.462 GHz (11 channels)
5.180~5.240 GHz & 5.745~5.825 GHz (9 channels)
Europe CE/ETSI:
2.412~2.472 GHz (13 channels)
5.180~5.240 GHz (4 channels)
Japan(JP):
2.412~2.484 GHz (13 Channels)
5.180~5.240 GHz (4 channels)
Canada(CA):
2.412~2.462 GHz (11 channels)
5.180~5.240 GHz & 5.745~5.825 GHz (9 channel)
Frequency Band
SSID broadcast disable
WEP: (64-bit ,128-bit key supported)
WPA:
WPA2 :802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Encryption Security
Wireless Security
IAP-620+
PoE P.D Port
Present at ETH2
Fully compliant with IEEE 802.3af Power
Device specification
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance: 10 ohms min
8
ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D)
Protocol
Protocol Support
WLAN LED
WLAN Link /ACT: Green: Link, Orange : Poor signal
Green for WLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%
804 g
-10 to 60 C (-14 to 140 F)
o
o
Operating Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class A
EMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN1000-4-6(CS),
EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27
Shock
IEC60068-2-32
IEC60068-2-6
Vibration
EN60950-1
Safety
Free Fall
Warranty
3 years
Fault contact
Relay
Relay output to carry capacity of 1A at 24VDC
PWR 1(2)(PoE) / Ready:
Red On: Power is on and booting up.
Green On: Power is on and functioning Normally.
Installation
DIN-Rail Install Step
Wall-mounted Install Step
ORing Industrial Networking Corp.
Copyright© 2012 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oring-networking.com
E-mail: [email protected]
PRINTED ON RECYCLED PAPER
