Quick Installation Guide
Version 1.0
Q
uick
I
nstallation
G
uide
Introduction
PRINTED ON RECYCLED PAPER
The
is a managed industrial Ethernet switch
with sixteen 10/100/1000Base-T(X) ports and eight 100/1000Base-X SFP
ports. With two sets of bypass ports (the optical ports) that ensure constant
network connectivity if power outage or node failure occurs, the traffic will
bypass the inactive switch and continue to transfer to the next active
switch. The switch supports Ethernet Redundancy protocols, O-Ring
(recovery time <30ms over 250units of connection) and MSTP
(RSTP/STP compatible) to protect mission-critical applications from
network interruptions or temporary malfunctions with fast recovery
technology. With a wide operating temperature from -40 C to 70 C, the
device can be managed centrally via ORing’s proprietary Open-Vision
platform as well as via Web-based interfaces, Telnet, and console (CLI).
The switch is one of the most reliable choices for highly-managed and
fiber Ethernet applications.
DGS-9168GP-AIO_S series
o
o
Preparation
Before you begin installing the switch, make sure you have all of the package
contents available and a PC with Microsoft Internet Explorer 6.0 or later, for
using web-based system management tools.
Circuit Overloading:
Consideration should be given to the connection of the equipment to
the supply circuit and the effect that overloading of the circuits might have on overcurrent
protection and supply wiring. Appropriate consideration of equipment nameplate ratings
should be used when addressing this concern.
Safety & Warnings
Dimension
Panel Layouts
1. Fiber bypass ports
2. Reset button
3. Power LED
4. PWR1 LED
5. PWR2 LED
6. Ring master LED
7. Ring status LED
8. Fault indicator
9. Console port
10. 100/1000 Base-X fiber port
11. LNK/ACT LED for fiber port
12. 10/100/1000 Base-T(X) LAN port
13. LNK/ACT LED for LAN port
14. Speed LED for LAN port
Package Contents
Contents
CD
DGS-9168GP-AIO_S
Pictures
Number
X 1
X 1
Front Panel
The device is shipped with the following items. If any of these items is
missing or damaged, please contact your customer service representative for
assistance.
QIG
Console Cable
X 1
X 1
1
Network Connection
Q I G
DGS-9168GP-AIO_S
1907-2-29-DGS9168GPAIO-1.0
The switch provides standard Ethernet ports. According to the link type, the switch uses CAT 3,
4, 5,5e UTP cables to connect to any other network devices (PCs, servers, switches, routers, or
hubs). Please refer to the following table for cable specifications.
Industrial Desktop Managed Gigabit
Switch
SWITCH
I N D U S T R I A L
Desktop
DGS-9168GP-AIO_S
Network
B
Monitor
A
TX
RX
B
TX
RX
TX
RX
A
TX
RX
PWR1
PWR
Console
Reset
11520bps,
8, N, 1
PWR2 Ring
R.M
Fault
G2
G1
G4
G3
10/100/1000T
G6
G5
G8
G7
G22
G23
G20
G21
G18
G19
G20
G17
100/1000X
DGS-9168GP-AIO_S
165.00
300.00
88.00
24.00
20.75
63.60
14.70
3.00
3.70
AC100-240V
50-60HZ
Relay
2 345678
9
10 11
12 13 14
Rear Panel
1
2
1. Power socket of power input for
AC 100V~240V / 50~60Hz
2. Relay output to carry capacity of
1A at 24VDC
Cable Types and Specifications:
Cable
Type
Max. Length
Connector
10BASE-T
Cat. 3, 4, 5 100-ohm
UTP 100 m (328 ft)
RJ-45
100BASE-TX
Cat. 5 100-ohm UTP
UTP 100 m (328 ft)
RJ-45
1000BASE-T
Cat. 5/Cat. 5e 100-ohm UTP
UTP 100 m (328ft)
RJ-45
10/100 Base-T(X) MDI/MDI-X
Pin Number
MDI port
MDI-X port
1
TD+(transmit)
RD+(receive)
2
TD-(transmit)
RD-(receive)
3
RD+(receive)
TD+(transmit)
4
Not used
Not used
5
Not used
Not used
6
RD-(receive)
TD-(transmit)
7
Not used
Not used
8
Not used
Not used
1000Base-T MDI/MDI-X
Pin Number
MDI port
MDI-X port
1
BI_DA+
BI_DB+
2
BI_DA-
BI_DB-
3
BI_DB+
BI_DA+
4
BI_DC+
BI_DD+
5
BI_DC-
BI_DD-
6
BI_DB-
BI_DA-
7
BI_DD+
BI_DC+
8
BI_DD-
BI_DC-
1000Base-T RJ-45 Port
Pin Number
Assignment
1
BI_DA+
2
BI_DA-
3
BI_DB+
4
BI_DC+
5
BI_DC-
6
BI_DB-
7
BI_DD+
8
BI_DD-
10/100 Base-T(X) RJ-45 Port
Pin Number
Assignments
1
TD+
2
TD-
3
RD+
4
Not used
5
Not used
6
RD-
7
Not used
8
Not used
For pin assignments for different types of cables, please refer to the following tables.
Note: “+” and “-” signs represent the polarity of the wires that make up each wire pair.
To connect the console port to an external management device, you need an RJ-45 to DB-9
cable, which is also supplied in the package. Below is the console port pin assignment
information.
Console Port Pin Definition
The device provides two sets of
bypass fiber ports, giving the SFP fiber ports
additional redundancy capabilities. Connect a LC fiber cable from a fiber port to a
monitor port on the front panel and another LC fiber cable from the corresponding network
port to another switch. When the switch breaks down, incoming traffic will travel through the
bypass module and onto another active switch connected to the network port.
optical
Optical Bypass Connection
The fiber port will still work if it is not connected to any monitor port. However, the
fiber port will not have bypass ability when the device is down.
G10
G9
G12
G11
G14
G13
G16
G15
Network
B
Monitor
A
TX
RX
B
TX
RX
TX
RX
A
TX
RX
PWR1
PWR
Console
Reset
11520bps,
8, N, 1
PWR2 Ring
R.M
Fault
G2
G1
G4
G3
10/100/1000T
G6
G5
G8
G7
G22
G23
G20
G21
G18
G19
G20
G17
100/1000X
DGS-9168GP-AIO_S
G10
G9
G12
G11
G14
G13
G16
G15
Network
B
Monitor
A
TX
RX
B
TX
RX
TX
RX
A
TX
RX
PWR1
PWR
Console
Reset
11520bps,
8, N, 1
PWR2 Ring
R.M
Fault
G2
G1
G4
G3
10/100/1000T
G6
G5
G8
G7
G22
G23
G20
G21
G18
G19
G20
G17
100/1000X
DGS-9168GP-AIO_S
G10
G9
G12
G11
G14
G13
G16
G15
Power Cable
X 1
Elevated Operating Ambient:
Reduced Air Flow:
Mechanical Loading:
If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
Installation of the equipment in a rack should be such
that the amount of air flow required for safe operation of the equipment is
not compromised.
Mounting of the equipment in the rack should be
such that a hazardous condition is not achieved due to uneven mechanical
loading.
AC 100-240V
50-60 HZ
Relay
