4
fully read the manual or degradation will result. For example some people expect all bolts to be fully tightened but testing
has shown this to have a significant degrading effect.
Building a turntable will be relatively easy for some and a challenge for others. If at first things appear difficult, give
yourself time to think clearly and you will invariably find ways of accomplishing the objective. Most of the kit demands
little expertise – if you think anything is beyond your capability then you can either ask a friendly dealer to do the job for
a small fee or get a friend to do it.
These instructions are written to cater for everyone from beginners to experts in kit assembly and vinyl replay. Some
sections may therefore appear lengthy, as they need to cater for all potential questions and levels of expertise. When
reading the instructions, refer to the various diagrams for part names and clarity.
The kit will take between 1 to 4 hours to assemble depending on your expertise. The dc regulator electronics initially
encounter speed drift when first started and so will need at least 4 hours to run in before the speed can be finally set with
accuracy.
We wish you an enjoyable time not only in the building but most of all in the end result.
Cross section of suspended sub-chassis
