Maintenance
34
7-6
Adjusting the tension of the stainless steel sheet
If the stainless steel sheet is slacked, tighten and take up the slack of the stainless steel sheet.
Do not touch the end section of the stainless steel sheet with bare hands. Doing so
may result in injury.
1. Loosen the screw A or B.
Screw A: M3 Hexagonal socket head screw (2 pieces)
Screw B: M5 Hexagonal socket set screw (2 pieces)
A
B
2. Pull the stainless steel sheet in the direction of the arrow while holding down it by hand to take up its slack.
When loosing
the position B
When loosing
the position A
3. Tighten the screws.
Tightening torque: 1 N•m (142 oz-in)
4. Move the table manually and check that there is no
slack in the stainless steel sheet.
7-7
Warranty
Check on the Oriental Motor Website for the product warranty.
7-8
Disposal
Dispose the product correctly in accordance with laws and regulations, or instructions of local governments.
