Orientalmotor BXII Series Скачать руководство пользователя страница 8

Страница: 8 / 52

Installation and connection of the OPX-2A

−8−

4 Installation and connection of the

OPX-2A

4.1 Location for installation

The

OPX-2A

is designed and manufactured to be incorporated in equipment.

Install it in a well-ventilated location that provides easy access for inspection. The location must also satisfy the

following conditions:

•

Inside an enclosure that is installed indoors (provide vent holes)

•

Operating ambient temperature 0 to +40

C (+32 to +104

F) (non-freezing)

•

Operating ambient humidity 85% or less (non-condensing)

•

Area that is free of explosive atmosphere or toxic gas (such as sulfuric gas) or liquid

•

Area not exposed to direct sun

•

Area free of excessive amount of dust, iron particles or the like

•

Area not subject to splashing water (rain, water droplets), oil (oil droplets) or other liquids

•

Area free of excessive salt

•

Area not subject to continuous vibration or excessive shocks

•

Area free of excessive electromagnetic noise (from welders, power machinery, etc.)

•

Area free of radioactive materials, magnetic fields or vacuum

•

1000 m (3300 ft.) or less above sea level

4.2 Installation method

Using a metal plate of 1 to 3 mm (0.04 to 0.12 in.) in thickness, insert the

OPX-2A

into the mounting hole from the

front side and securely attach it.

+0.8

(3.62

)

+0.031

+0.7 0

(2.68

)

+0.028 0

•

Dimension of mounting hole [mm (in.)]

Removing method

Press all of the four hooks provided on top and bottom of the

OPX-2A

In this condition, press the

OPX-2A

forward to release.

Hook

Содержание BXII Series





















































Результаты поиска

Содержание BXII Series

Отзывы:

Orientalmotor BXII Series, Руководство по эксплуатации, Страница: 8 / 52

Результаты поиска

Содержание BXII Series

Отзывы: