Orientalmotor BXII Series Скачать руководство пользователя страница 18

Страница: 18 / 52

When using the product with the speed control mode

−18−

5.3 Data mode

Up to 16 sets of motor operation data can be set. Once set, the operation data is stored in the driver. The data will not

be lost even after the

OPX-2A

is disconnected from the driver.

Before setting operation data, read the "

Ⅱ

Series USER MANUAL" carefully to understand the basic operations,

functions and other details of the driver.

Note

•

Operation data has significant bearing on motor operation. Before setting any operation data,

make sure you fully understand the content of the operation data.

•

If operations are limited by the edit lock function, the operation data cannot be edited.

•

Operation data can also be set by selecting the ID in the parameter mode.

•

If the value you have input is outside the setting range, "Error" will be displayed for 1 second. If

this error display appears, input a different value that falls within the setting range.

Operation in the data mode

1. Use the

key to select the data mode.

2. Press the

key on the top screen in the data mode.

3. Use the

keys to select a desired operation data number.

4. Press the

key.

The display changes to the setting screen of the items in the operation data.

5. Use the

key to select the operation data item you want to set.

6. When pressing the

key on the last operation data item, the display returns to the screen of the

operation data number.

Operation

data number 0

Top screen in

the data mode

Operation

data number 15

Acceleration

time

Torque

limiting

Deceleration

time

Data clear

Operation

speed

*•

If operations are limited by the edit lock function, the screens in gray color are not displayed.

Note

If the

key is pressed while the driver performs the internal processing, the screen cannot

change to any lower level from the top screen, and "mEm-bUSY" is displayed. Be sure to wait until

all internal processing is completed, before pressing the

key.

Содержание BXII Series





















































Результаты поиска

Содержание BXII Series

Отзывы:

Orientalmotor BXII Series, Руководство по эксплуатации, Страница: 18 / 52

Результаты поиска

Содержание BXII Series

Отзывы: