5
Regulations and standards
UL Standards, CSA Standards, CCC System
This product is recognized by UL under the UL and CSA Standards, and also
certified by CQC under the China Compulsory Certification (CCC) system.
The motor model name represents the model that conforms to the standards.
z
Applicable standards
Applicable standards
Certification Body / File No.
UL 1004-1, UL 1004-2, UL 1004-3
UL /
UL File No.E64197, E64199
CSA C22.2 No.100, CSA C22.2 No.77
GB 12350
CQC
•
Thermal Class: 130 (B)
z
Standards for accessories
•
Capacitor: UL File No.E83671 (CYWT2),
VDE License No.112847 (capacitors with a rated voltage of 250 VAC),
114747 (capacitors with a rated voltage of 450 VAC)
•
Capacitor cap: UL File No.E56078 (YDTU2)
CE Marking
This product is affixed the CE Marking under the Low Voltage Directive.
z
Low Voltage Directive
•
•
Applicable standards
EN 60034-1, EN 60034-5, EN 60664-1
Momentary excess torque based on EN 60034-1
Model Momentary excess torque
Momentary excess torque represents
a maximum torque that can maintain
the operation for 15 seconds without
stalling or abrupt speed change even
if the torque is increased gently while
operating at rated voltage and rated
frequency.
2RK6
3RK15
130% of the rated torque
4RK25
5RK40
5RK60
160% of the rated torque
5RK90
140% of the rated torque
•
•
Installation conditions
(For EN standard)
Overvoltage category
Ⅱ
, Pollution degree 2, Class
Ⅰ
equipment
When the machinery to which the motor is mounted requires overvoltage
category
Ⅲ
specifications, install the motor in a cabinet that connect to power
supply via an isolation transformer.
•
•
Motor temperature rise tests
Temperature rise tests required by the above standards are performed in a state
that has been attached a heat radiation plate instead of a gearhead.
The size and material for the heat radiation plates are as follows.
[Size]
2RK6
: 115×115 mm (4.53×4.53 in.)
3RK15
: 125×125 mm (4.92×4.92 in.)
4RK25
: 135×135 mm (5.31×5.31 in.)
5RK40
: 165×165 mm (6.50×6.50 in.)
5RK60
,
5RK90
: 200×200 mm (7.87×7.87 in.)
[Thickness] 5 mm (0.20 in.)
[Material] Aluminum alloy
Hazardous substances
The products do not contain the substances exceeding the restriction values of
RoHS Directive (2011/65/EU).
