Oriental motor BX2 Driver Edition Series, Руководство по эксплуатации

Страница: 26 / 28

26
Specifications
11 Specifications
„ „
Specifications
The value in a state where the gearhead is not combined is described in each specification for the rated torque,
maximum instantaneous torque, and rated speed.
For motor models, refer to the operating manual included with the motor.
z
30 W, 60 W
Model
Motor BXM230 BXM460
Driver BXSD30-A2 BXSD30-C2 BXSD60-A2 BXSD60-C2
Rated output power (Continuous) 30 W 60 W
Power
supply
input
Rated voltage
Single-phase
100-120 VAC
Single-phase
200-240 VAC
Three-phase
200-240 VAC Single-phase
100-120 VAC
Single-phase
200-240 VAC
Three-phase
200-240 VAC
Permissible voltage range −15 to +10%
Rated frequency 50/60 Hz
Permissible frequency range ±5%
Rated input current Single-phase: 1.4 A
Single-phase: 0.8 A
Three-phase: 0.5 A
Single-phase: 2.2 A
Single-phase: 1.4 A
Three-phase: 0.7 A
Maximum input current Single-phase: 4.0 A
Single-phase: 2.2 A
Three-phase: 1.3 A
Single-phase: 5.5 A
Single-phase: 3.0 A
Three-phase: 1.9 A
Rated torque 0.1 N·m (14.2 oz-in) 0.2 N·m (28 oz-in)
Maximum instantaneous torque 0.2 N·m (28 oz-in) 0.4 N·m (56 oz-in)
Rated speed 3000 r/min
z
120 W, 200 W, 400 W
Model
Motor BXM5120 BXM6200 BXM6400
Driver BXSD120-A2 BXSD120-C2 BXSD200-A2 BXSD200-C2 BXSD400-C2
Rated output power (Continuous) 120 W 200 W 400 W
Power
supply
input
Rated voltage
Single-phase
100-120 VAC
Single-phase
200-240 VAC
Three-phase
200-240 VAC Single-phase
100-120 VAC
Single-phase
200-240 VAC
Three-phase
200-240 VAC
Single-phase
200-240 VAC
Three-phase
200-240 VAC
Permissible voltage range −15 to +10%
Rated frequency 50/60 Hz
Permissible frequency range ±5%
Rated input current Single-phase: 3.7 A
Single-phase: 2.3 A
Three-phase: 1.1 A
Single-phase: 4.7 A
Single-phase: 2.8 A
Three-phase: 1.7 A
Single-phase: 4.7 A
Three-phase: 2.8 A
Maximum input current Single-phase: 9.8 A
Single-phase: 5.5 A
Three-phase: 3.4 A
Single-phase: 11.3 A
Single-phase: 7.1 A
Three-phase: 4.5 A
Single-phase: 9.8 A
Three-phase: 6.4 A
Rated torque 0.4 N·m (56 oz-in) 0.65 N·m (92 oz-in) 1.3 N·m (184 oz-in)
Maximum instantaneous torque 0.8 N·m (113 oz-in) 1.3 N·m (184 oz-in) 2.6 N·m (360 oz-in)
Rated speed 3000 r/min
„ „
General specifications
Operating
environment
Ambient temperature
0 to +50 °C [+32 to 122 °F] (non-freezing)
0 to +40 °C [+32 to +104 °F)] when drivers of 200 W type or 400 W type are installed closely
Ambient humidity 85% or less (non-condensing)
Altitude Up to 1000 m (3300 ft.) above sea level
Surrounding atmosphere
No corrosive gas, dust.
Cannot be used in radioactive materials, magnetic field, vacuum or other special environment.
(For details about installation locations, refer to p.10.)
Vibration
Not subject to continuous vibrations or excessive impact.
In conformance with JIS C 60068-2-6 "Sine-wave vibration test method"
Frequency range: 10 to 55 Hz, Pulsating amplitude: 0.15 mm (0.006 in.)
Sweep direction: 3 directions (X, Y, Z), Number of sweeps: 20 times
Storage
environment
Shipping
environment
Ambient temperature −25 to +70 °C [−13 to +158 °F] (non-freezing)
Ambient humidity 85% or less (non-condensing)
Altitude Up to 3000 m (10000 ft.) above sea level
Surrounding atmosphere
No corrosive gas, dust. Cannot be used in radioactive materials, magnetic field, vacuum or other
special environment.
Degree of protection IP20