Oriental motor BX2 Driver Edition Series, Руководство по эксплуатации

Страница: 21 / 28

21
Operation
7.2 Test operation (JOG operation)
Simply connecting a power supply, motor, and driver can perform JOG operation. Using JOG operation, the connection
between the motor and the driver can be checked.
„ „
Operating method (Speed control mode)
This section explains the procedure to operate in the speed control mode.
1. When the power supply is turned on, the speed of the monitor mode is displayed.
Press the [MODE] key four times.
The display changes to “tESt.”
Press four
times
Press once
Press once
Press once
or key
Operate a motor with
Press once
2. Press the [SET] key once.
The display changes to “io.”
3. Press the [
∨
] key once.
The display changes to “JoG.”
4. Press the [SET] key.
The display changes to “JSPd.”
5. Press the [SET] key once again.
The display changes to “0.”
6. Operate the motor in JOG operation by pressing the [
∧
] key or [
∨
] key.
The operating speed is displayed during JOG operation.
The motor rotates in the clockwise direction while the [
∧
] key is pressed.
The motor rotates in the counterclockwise direction while the [
∨
] key is pressed.
„ „
Operating conditions of JOG operation
JOG operation is performed under the following conditions.
•
Operating speed: 300 r/min
• Acceleration/deceleration: 0.100 sec
•
Operating torque: 100% (rated torque)
The operating conditions can be changed by the parameter. Refer to the USER MANUAL for details.
Note
• In JOG operation, the motor rotates while the [
∧
] key or the [
∨
] key is pressed. Make sure that there is no danger due
to motor rotation before executing JOG operation.
• JOG operation cannot be executed while the FREE input or STOP input is being ON. Be sure to turn these input signals
OFF before executing JOG operation.