background image

4

Safety Information and Warnings

Please read before installing or opearating Your 

Oricom Radio

The operation of your UHF radio in Australia and New Zealand is subject to 
conditions in the following licenses:
In Australia the ACMA Radio communications (Citizen Band Radio Stations) and 
in New Zealand by MED the General User Radio License for Citizen Band Radio.

Safety Information and Warnings

WARNING

Potentially Explosive Atmospheres 

Turn your radio OFF when in any area with a potentially explosive 
atmosphere. Sparks in such areas could cause an explosion or fire 
resulting in injury or even death.

NOTE:

 Areas with potentially explosive atmospheres are often, but 

not always clearly marked. They include fueling areas such as below 
deck on boats; fuel or chemical transfer or storage facilities; areas 
where the air contains chemicals or particles, such as grain, dust, 
or metal powders; and any other area where you would normally be 
advised to turn off your vehicle engine.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn your 
radio OFF near electrical blasting caps or in a “blasting area” or 
in areas posted: “Turn off two way radios.” Obey all signs and 
instructions.

Electromagnetic Interference/Compatibility

Nearly every electronic device is susceptible to electromagnetic 
interference (EMI). To avoid the possibility of electromagnetic 
interference and/or compatibility conflicts, turn off your radio in any 
location where posted notices instruct you to do so such as health 
care facilities.

UHF380_manual.indd   4

2013-3-8   8:56:10

Содержание UHF380







































Отзывы: