Oricom UHF380, Руководство по эксплуатации

Страница: 16 / 38

16
Priority Scan
With Priority Scan the Radio scans for activity, but in addition, it also inserts your
Priority Channel into the scan sequence.
This means that your Priority Channel will be monitored regularly while scanning
to ensure that no calls are missed. Any signals received on your Priority Channel
will take precedence over any signals received on the other channels.
PRIORITY SCAN
......
Allows you to monitor a Priority Channel while scanning other channels in the memory.
Instant Scan
During Open Scan press and hold SC/MEM button to start Instant Scan, only the channels
programmed in the instant channel buttons with 'M' set will be scanned. To stop scan
press the SC/MEM button or Push PTT
.
Memory On/Off
Push and hold the
SC/MEM
button for 2 seconds, "M" will appear above the selected
channel. Press SC/MEM button to remove scan memory from the selected open scan
mode.
SC / MEM MO/TSQ
ID/CAL
PRI/LO F/ DPX
Instant Memory
To save a channel to Instant memory location Select the channel to be saved include
any CTCSS or DCS settings. Briefly press the power button 2 times then press and hold
the required 'I' button. The buttons have been preprogrammed with the following I1
CH1, I2 CH12, I3 CH5, I4 CH20, I5 CH40.
Operations
UHF380_manual.indd 16 2013-3-8 8:56:17