Backing
Horizontal
(20)
(4)
(16)
Hanging
Brackets
Euroscrew
s
Connector Bolts
Left Side
Right Side
Top and Bottom
Install (8) Connector Bolts into small holes on Top and Bottom Panels.
(a) Attach Top. (b) Lock Cams by turning clockwise until snug.
Step 4: Attach Top
Step 3: Attach Sides and Verticals
a
b
Lock
Cam
Open
a
a
b
Assembling the Cubby GOBox
Smaller Holes for
Connector Bolts
Top
Step 2: Install Connector Bolts
Vertical
Attach Hanging Brackets to Sides using Euroscrews.
(If using Power Drill, set torque to low setting.)
Back Edge
Back Edge
Right Side
Left Side
Step 1: Attach Hanging Brackets
(1)
Nameplate
and Screws
Vertical
Backing Nails
freedomRail Garage Assembly Instructions
Cubby GOBox
(a) Attach Sides and Verticals to Bottom. (b) Lock Cams by turning clockwise until snug.
Tools Required
Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
Hammer
Contents of Package
Left Side
Right Side
(16)
1
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
Over
Top and Bottom
