freedomRail Assembly Instructions
3 Drawer OBox
Contents of Package
Assembling the 3 Drawer OBox
Tools Required
Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
Left Side
of OBox
(Inside View)
(1) Large Drawer Back
(Inside View)
(2) Small Drawer Backs
(Inside View)
(3) Drawer Bottoms
(1) Large
Drawer
Right Side
(1) Large
Drawer
Left Side
(2)
Small
Drawers
Right
Sides
(2) Small Drawer Fronts
(1) Large Drawer Front
Bottom
(Inside View)
(6)
(3) Handles
Machine Screws
(For Drawer Pulls)
(6) Full Extension Drawer Glides
(34) Euroscrews
(6) 1 5/8" Wood Screws
(14) Connector Bolts
Hanging
Brackets
(2)
Right Side
of OBox
(Inside View)
Top
(Inside View)
(2)
Small
Drawers
Left
Sides
Step 1: Attach Hanging Brackets
Step 2: Install Connector Bolts
Left Side
Right Side
Back Edge
Back Edge
Bottom
Install (4) Connector Bolts into small holes on Top and Bottom Panels.
Step 3: Attach Sides
Cam
Lock
Open
(a) Attach Sides to Bottom. (b) Tighten Cams by turning clockwise until snug.
(a) Attach Top. (b) Tighten Cams by turning clockwise until snug.
Step 4: Attach Top
Attach Hanging Brackets to Sides using Euroscrews.
(If using Power Drill, set torque to low setting.)
Top
Smaller Holes for
Connector Bolts
1
Over
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
