a
freedomRail Assembly Instructions
2 Drawer Big OBox
1
(a) Attach Top. (b) Tighten Cams by turning clockwise until snug.
(a) Attach Sides to Bottom. (b) Tighten Cams by turning clockwise until snug.
Step 3: Attach Sides
Step 1: Attach Hanging Brackets
Contents of Package
Step 2: Install Connector Bolts
Step 4: Attach Top
Attach Hanging Brackets to Sides using Euroscrews.
(If using Power Drill, set torque to low setting.)
Install (4) Connector Bolts into small holes on Top and Bottom Panels.
Over
Top
Bottom
Euroscrews
1 5/8"
Wood
Screws
(2) Larger
Drawer
Left Sides
(2) Larger
Drawer
Right Sides
(2) Handles
(4)
Machine Screws
(for Handles)
Top and Bottom
Right Side
Back Edge
Back Edge
Left Side
Smaller Holes for
Connector Bolts
(2) Large Drawer Backs
(2) Drawer Bottoms
(2) Larger Drawer Fronts
Connector
Bolts
Hanging
Brackets
(12)
(4)
(4)
(36)
Top
Cam
Lock
Open
a
b
a
a
b
Assembling the 2 Drawer Big OBox
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
(4) Full Extension Drawer Glides
Tools Required
Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
Left Side
Right Side
