Tools Required
#2 Phillips
Screwdriver
#2 Phillips Driver
1
Over
(2)
freedomRail Assembly Instructions
1 Drawer Double Hang Big OBox
Left Side
Right Side
Bottom
Top
Drawer Bottom
Drawer Front
Euroscrews
1 5/8" Wood Screws
Drawer Back
Drawer Side
Right Side
Drawer Side
Left Side
(1) Drawer Pull
Machine Screws
(For Drawer Pull)
(2) Full Extension Drawer Glides
(18)
(2)
(10)
Contents of Package
Connector Bolts
Hanging
Brackets
(2)
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
Power Drill
Cam
Lock
Open
Top
Step 3: Attach Sides
(a) Attach Sides to Bottom. (b) Lock Cam by turning clockwise until snug.
Step 4: Attach Top
(a) Attach Top. (b) Tighten Cams same as in Step 3.
Align Arrow With Hole.
Assembling the 1 Drawer Double Hang Big OBox
Step 1: Attach Hanging Brackets
Left Side
Right Side
Back Edge
Back Edge
Attach Hanging Brackets to sides using Euroscrews.
(If using power drill, set torque to low setting.)
Step 2: Insert Connector Bolts
Bottom
Smaller Holes for
Connector Bolts
Insert (4) Connector Bolts into small holes on Top and Bottom Panels.
