a
freedomRail Assembly Instructions
2 Drawer OBox
1
(a) Attach Top. (b) Tighten Cams same as in Step 3.
(a) Attach Sides to Bottom. (b) Tighten Cams by turning clockwise until snug.
Step 3: Attach Sides
Step 1: Attach Hanging Brackets
Contents of Package
Step 2: Install Connector Bolts
Step 4: Attach Top
Attach Hanging Brackets to Sides using Euroscrews. (
If using Power Drill, set torque to low setting.)
Install (4) Connector Bolts into small holes on Top and Bottom.
Over
Top
(Inside View)
Bottom
(Inside View)
Left Side
of OBox
(Inside View)
(26)
Euroscrews
1 5/8" Wood Screws
(2) Drawer
Left Sides
(2) Drawer
Right Sides
(2) Drawer Pulls
(4)
Machine Screws
(For Drawer Pulls)
Top and Bottom
Right Side
Back Edge
Back Edge
Left Side
Smaller Holes for
Connector Bolts
(2) Drawer Backs
(Inside View)
(2) Drawer Bottoms
(2) Drawer Fronts
Connector Bolts
Hanging
Brackets
(12)
(4)
(2)
Right Side
of OBox
(Inside View)
Top
Cam
Lock
Open
a
b
a
a
b
Assembling the 2 Drawer OBox
Proper Care for an OBox: Use Goo Gone™ or Simple Green® with a rag or putty knife to remove any excess glue or marring that was caused by shipping or assembly.
(4) Full Extension Drawer Glides
Tools Required
Power Drill
#2 Phillips
Screwdriver
#2 Phillips Driver
Align Arrow With Hole.
