ORGA L85EX, Руководство по установке и обслуживанию

Страница: 16 / 72

INSTALLATION
16 Version 2.1
1.4 Installation of L85EX
1.4.1 Install the light fixture
Orga advises to install the light fixture according to the procedure below:
1.
Install the light fixture with the cables
sideways (because of the looping).
2. Fasten the light fixture to the surface.
•
Fasten the foot of the base with a bolt
(A), a suitable spring lock washer (B)
and washer (C).
•
Fasten each foot of the base.
3. Make sure that the light fixture is
horizontally levelled.
Use a spirit level
device
.
4. Install the light fixture electrically.
1.4.2 Open the cover assembly
1. Open the cover assembly. Refer to section
2.1
.
1.4.3 Connect the power supply cable
1. Fasten the power supply cable with the
cable gland (A)
2. Close the second cable entry with a blind
plug (B).
3. Connect the cable to the control panel (not
included).
Note
•
The light fixture must be installed on a rigid, horizontal surface, in a posi-
tion that meets the specific visibility requirements.
•
Always use fixing bolts, nuts and locknuts to horizontally level the lighting
fixture.
•
Keep an open space of 1 m around the light fixture for maintenance pur-
poses.
A
B
C
Note
For looping (daisy chaining), use
two power supply cables and two
cable glands.
A
B