1
GB
CABLE FREE
THERMO-HYGRO SENSOR
MODEL: THGR968
USER’S MANUAL
INSTALLATION
The thermo-hygrometeris a self-contained unit and is powered by
a solar cell Solar Power Cell:
1. Unscrew the screws on the back cover of the solar power cell
STR-928 and remove the back cover.
2. Insert the thermo-hygrometer cable into the cable connection
in the solar power cell.
3. Insert two “AA” batteries (included) with the polarities in
the direction as shown inside the compartment.
4. Position the cable so the cable is placed into the cable recess
and the back cover can fit into place.
5. Press the [RESET] button.
6. Place the back on the unit and tighten the screws reattaching
the backcover to the solar power cell unit.
INTRODUCTION
Congratulations on your purchasing the THGR968 Remote-hygro
Thermo Sensor. The Remote Thermo-Hygro Sensor is used with the
OSI Wireless Weather Station WMR112A to monitor temperature
and humidity changes of remote or outdoor sites . Operation is easy
and no wire installation is required.
‘A
A
’Um3
1.5V
‘A
A
’Um3
1.5V