Boombero GREAT
Model: ZP388
Instruction manual
PRODUCT OVERVIEW
1.
NFC / Status LED indicator
6.
Bluetooth activated/ talk
2.
Charging LED light
7.
MAXX
3.
DC in port
8.
Play/Pause
4.
Line in port
9.
Volume up
5.
Power on/off
10.
Volume down
CONTENTS
1. Boombero GREAT.
2. USB cable
3. Line-in cable
SET UP
1. Plug the BOOMBERO GREAT into an outlet using the included wall charger.
2. The Charging LED light will turn white when it is fully charged. It would take
around 2.5 hr for full charge.
Note:
Please charge the battery at least 3 to 4 hours at the first time.
1. Pair your Bluetooth ® device to the speaker when you turn on the speaker for
the first time.
2. The speaker pairs with devices that use the Bluetooth ® Hands Free Profile
(HFP) and/or the Advanced Audio Distribution Profile (A2DP). HFP enables
hands-free communication and the A2DP dictates how audio is streamed from
one device to another over a Bluetooth® connection.
3. When you pair devices to the speaker, the devices operate accounting to their
protocols.
1. Please upload NFC- BT Easy to your Android operated smart phone with NFC
function if your android platform is under 4.1 version
2.
Please be reminded to turn on your smart phone’s Bluetooth connection
3. Tap your smart phone to NFC sensor region at the top of speaker. This refers to
“NFC” wording in white color
4. Then your smart phone will instantly pair with Bluetooth speaker for music
enjoyment
5. To disconnect it, please tab your connected smart phone at NFC sensor region
again
Note:
Please ensure your smart phone is equipped with NFC function.
To ensure your smart phone got NFC function, please find updated NFC
phone list at below website at http://www.nfcworld.com/nfc-phones-list/
1. In Press and hold
unit the voice “Hi BOOMBERO is on” and press
to
enter the pairing mode
2. Prepare your Bluetooth ® device (mobile phone or music player) to pair.
3. Select the searching mode on your Bluetooth ® device
4.
Your Bluetooth ® device should find “BOOMBERO Great”, select it and pair it
5. Verify that you are connected to the speaker. The Bluetooth ® LED & the
speaker will change to a solid blue when paring is complete
Status:
1.
Status:
“OFF” stage with rechargeable batteries not fully charged
a.
DC Plug in
“RED” charging LED breathe 2 seconds
2.
Status: “OFF” stage with rechargeable batteries FULLY charged
a.
DC Plug in
“RED” charging LED flash and them off
3.
Press & Hold the
3 second and power on the unit and then enter into the
Standby mode
4.
Status: “Standby mode”
a.
Line in plug in
Play music immediately
b.
Press & Hold
1second : “BLUE” LED flash alternatively, Enter to
Bluetooth pairing mode and connect with your Bluetooth ® devices
c.
Press & Hold
in 1second and then turn-off the unit.
5.
Status: “Bluetooth connected”
a.
“RED” LED Light on ( power-on state )
b.
Bluetooth signal disconnected
Searching 10second and then enter
standby if no further signal connected
c.
Line in plug in
Music channel change to line in signal immediately and
resume Bluetooth channel immediately when line in plug out
d.
Press & Hold the
in 1second
enter Bluetooth pairing mode,
“BLUE” LED indicator flash
6.
Status: Music playing
a.
Press
and then the music volume are going down
7.
Status: Music playing
a.
Press
and
then
the
music
volume
are
going
up
8.
Speaker Phone
a.
When phone calling
b.
Answer a call - Press the
to enter conference call
c.
Reject a call - Press Hold ( 3 seconds ) the
to cut the incoming
call
d.
Hang-up a call
– Press the
to hang-up the call
9.
Play / Pause Button
When playing music, - Press
, music playing Pause
Press
again, music resume playing (Volume are resume to before)
10. MaxxBass On / Off Button
(Default are ON when power on)
a.
When playing music (Bluetooth or Line-in)
-
Press “
“– Turn off MaxxBass function
-
Press “
“again – Turn On MaxxBass level 1
-
Press “
“again – Turn On MaxxBass level 2
1. Plug in the line in cable into the rear of the speaker Aux in socket.
2. Connect the other end of the line in cable to your devices headphone socket.
3. Recommend to play the speaker unit at maximum sound level.
SPECIFICATIONS
Power input:
5V, 2A
Total output:
8W, (4W/Channel)
Passive Radiator
Playtime (via Bluetooth
®
connect):
Approximately 8~10 hours
Recharging Time:
25 hours
Dimension:
208 X 65 X 91mm
Audio input
3.5mm Line-in jack, Bluetooth 3.0(A2DP)
Wireless
Bluetooth 3.0, NFC
Built Battery
3.7V, 2200mAh Li-Polymer battery
EN
NFC FUNCTION WORK FLOW
PAIRING MODEL
AND PAIRING
KEY FLOWS
LINE-IN FUNCTION
PAIRING BLUETOOTH
®
DEVICE
