3
GB
MAIN UNIT: BATTERY INSTALLATION
To install batteries into the main unit:
1. Press the door tab and click open the battery door at the back of
the main unit.
2. Install six (6) pieces of AA-sized or UM-3 1.5V batteries by
following the polarities shown inside the battery compartment.
For proper functioning it is advised to install batteries first into
the lower compartment and then into the upper one (Please note
that if batteries are already installed into the unit, first pull out
and remove the insulation tape in the remote sensor [marked 1].
After that pull out and remove the insulation tapes in the lower
compartment [marked 2] and then the one in the upper one
[marked 3] as well).
3. Replace the battery door and press [RESET].
NOTE ON DETACHABLE SPEAKER
2
1
Slide up
Pull out
1
2
Push In
Slide Down
S1. LCD
Displays the current temperature monitored by the remote unit
S2. LED INDICATOR
Flashes when the remote unit transmits a reading
S3.
°
C/
°
F SLIDE SWITCH
Selects between Centigrade (
°
C) and Fahrenheit (
°
F)
S4. RESET BUTTON
Returns all settings to default values
S5. BATTERY COMPARTMENT
Accommodates two UM-3 or AA size batteries
S6. BATTERY DOOR
S7. WALL-MOUNT HOLDER
Supports the remote unit in wall-mounting
S8. REMOVABLE TABLE STAND
For standing the remote unit on a flat surface
POWER REQUIREMENTS
The main unit operates on six (6) pieces of AA-sized or UM-3 1.5V
batteries (alkaline batteries reecommended). The clock, radio and
remote thermometer have separate low battery indicators. Change
the batteries accordingly when the respective indicator lights up.
Low Battery Indicator for Clock
For Radio
For Remote Sensor
An 8V AC Power Adapter is included. To connect, plug it into the
power adapter connector and the other end to a wall socket. If you
wish to turn on the radio for a long period, please use the adapter for
power supply.
For the Remote Thermo Sensor THR268, it operates on two (2)
pieces of AA-sized or UM-3 1.5V batteries. When its power level
is low, the low battery indicator will be shown. In that case, change
the batteries accordingly.
If not properly disposed of batteries can be harmful. Protect the
environment by taking exhausted batteries to authorized disposal
stations.
Note: Two (2) pieces of batteries should be installed in the upper
battery compartment while the other four (4) pieces in the lower
one. Please note that when adapter is connected, there is no need
to insert batteries into the lower battery compartment but two (2)
pieces of batteries are still required to be installed in the upper
compartment for clock operations.
