Oregon
®
91VX saw chain features top performing Chamfer Chisel™ cutters.
The twin corners of the cutters on 91VX chain deliver superior performance
on the many popular saws which use low-profile 3/8
"
-pitch chain.
91VX
.050”
91 VX is intended for use with elec-
tric saws and smaller gasoline-pow-
ered saws up to 2.5 cu. in. (41cc)
10 in. to 18 in. (25 to 46 cm)
3/8”
Ramp-shaped
depth gauges
on each cutter
Commercial
CHAIN PITCH AND GAUGE
KICKBACK – ANSI CLASSIFICATION
RECOMMENDED TYPES OF USE
RECOMMENDED SAW SIZES
RECOMMENDED BAR LENGTHS
KICKBACK-REDUCING FEATURES
PITCH
GAUGE
91VX saw chain may be capable of
kickback that could result in serious
injury to the saw operator or bystand-
ers. Do not use this saw chain unless
you have experience and specialized
training for dealing with kickback.
Saw chain with reduced kickback
potential is available.
91VX F&B A107040 AB 0807
Standard sequence: 91VX
CUTTER SEQUENCE
91VX SAW CHAIN
Advanced geometry grind
Improved out-of-box grind
•
Dramatic speed improvements in all cut-
•
ting modes
Extreme cutting efficiency, less feed force
•
required
Chamfer Chisel™ cutters with
special shaped low-vibration
heels
Twin cutting corners offering outstanding
•
performance, durability and easy mainte-
nance
Less vibration than competitive chains
•
Ramp-shaped depth gauges
The ramp-shape reduces kickback ener-
•
gies without affecting performance
Blued cutters
Superior corrosion resistance
•
Base-cutter hardness consistency
•
Sharpens with standard 5/32"
round file and file guide
Easy hand maintenance
•
Vibe-Ban™
Reduces vibration 25% or more at the saw
•
handle
LubriLink™
Help keep oil where it’s needed - on the
•
chain
Directs oil to the critical rivet flange/hole
•
interface
Lubriwell™
Help carry oil around the full length of the
•
guide bar’s groove
Enhances lubrication of the bar nose
•
sprocket and bearings
Features
Benefits
