`
Wired water leak sensor (ORC-LEAK-WD-WH)
Low Profile Water sensors that can be installed in areas vulnerable to water leak.
Specification
•
L64 x W16 x H13mm (excluding wire)
•
Housing Material
–
ABS White
•
Working Voltage 5
–
12V DC (Red is Positive and White is Ground)
•
Max voltage
–
(Peak) 24V DC
•
Max current 0.5A
•
Temperature -10 to +65 C
•
Wire cored
–
up to 350mm length
•
Wire termination Red= (+), White= (-)
•
Output type NPN type
Installation
This unit is designed for one use application. Once the unit has been submerged in water it must be
replaced.
Please follow the instructions of the monitoring device for any additional installation requirements.
The Water Leak detection requires voltage to work correctly. It is NOT a passive device. Inside the unit
contains electronic components that monitor the water across the 2x metal plates.
