Orchid Vidiola, Руководство пользователя, Страница: 57 / 67

Vidiola User's Manual
NTSC Video Output (Vidiola Pro and Vidiola Pre-
mium only)
If you do not get an output signal make sure you are
running your VGA at 640x480, 60Hz refresh rate. If
this fails, configure your windows desktop again
using the Microsoft VGA driver and confirm that
the Vidiola INIT has been initialized.
Base Memory Setting
If your motherboard has over 8MB of system memory
installed, please remember to configure your Vidiola
software for a hexadecimal memory base. Also,
remember to exclude the appropriate memory range
from your memory management (this pertains to
EMM386, QEMM, Netroom, and 386MAX). Refer
to your memory management documentation if you
are unfamiliar with the appropriate exclude syntax
required.
Hex Address Exclusion Required
D000H D000-D7FF
D800H D800-DFFF
E000H E000-E7FF
E800H E800-EFFF
For example, if you are using EMM386 and you have
selected a Hex Address of D000H, the line in your
CONFIG.SYS file would read:
DEVICE=C:\DOS\EMM386.EXE X=D000-D7FF
VGA Compatibility
Your Vidiola card is designed to connect to a VGA
card using the feature connector. This connector is
an industry standard endorsed by VESA (Video
Electronics Standards Association). Orchid Tech-
nology has performed extensive testing to ensure
that the feature connector on the Vidiola card con-
55
Appendix B: Tech Support Tips