Orchid Vidiola, Руководство пользователя, Страница: 56 / 67

Vidiola User's Manual
Once you have decided which standard your video
input device supports, you must set it up correctly
in the Source Configuration section of the Vidiola
Configuration program. Also, you must select the
appropriate number of frames per second (fps) in
the capture program.
If you attempt to capture
30fps with a PAL video source, five frames are
dropped for each second captured because those
frames are not there!
Vidiola Configuration Program Settings
Upon entering windows, confirm that your address
settings and Vidiola options are set properly in the
Vidiola Configuration program. Confirm that your
software settings match your hardware settings on
your Vidiola board, and that your video source is
playing and can be viewed through the Live Video
window.
Video Capture Issues (this point is not applicable for
the Vidiola Pro/C card)
If you fail to capture properly in Adobe Capture,
recheck your capture options or try changing the
settings in the "Hardware" section of the Vidiola
Configuration program. As a quick test, you can
switch off the overlay inside the Adobe Capture
program. To do this, uncheck the Overlay setting
from the Capture pull-down menu.
If your Memory Base setting is correct you will see
the video, but it will be running at a slower frame
rate. If your settings are not correct, you will see
multicolored bars; this means that your Memory
Base setting is wrong and you should try a different
setting. You can change the setting without having
to restart Windows, however, you must restart the
Adobe Capture Program after each change to re-
initialize the capture driver. NOTE: Recheck the
Overlay setting before attempting capture.
Appendix B: Tech Support Tips
54