Orchid Vidiola, Руководство пользователя, Страница: 22 / 67

Vidiola User's Manual
CAUTION:
Make sure
the Orchid
logo on the
daughtercard
is facing the
same
direction as
the Orchid
logo on the
Vidiola Pro
card.
11. Reconnect previously removed cables and power
cords and replace the cover of the computer.
Vidiola installation is complete.
Vidiola Premium Daughtercard Installation
1. Carefully remove Vidiola Pro from your com-
puter and place it on a flat surface.
2. Locate the daughtercard connectors on Vidiola
Pro. The connectors are at locations JP8 and JP9
(see Figure 1.2).
3. Verify the jumper settings on the daughtercard.
Refer to the "Jumper Settings" section for more
information.
4. Position the daughtercard over the connectors.
Use your thumbs to press evenly on the top and
bottom of the daughtercard so it seats com-
pletely down into the connectors.
5. You are now ready to install the Vidiola Pre-
mium. Go to "Step 3: Installing Your Vidiola"
and begin at step 3.
Using S-Video (S-VHS)
For Vidiola Pro and Premium only. If you have an S-
VHS or Hi-8 video source and want to take advan-
tage of its S-Video capability, you must install the
Vidiola S-Video Sub card (see Figure 1.3). The
Vidiola S-Video Sub card provides S-Video input
and output. Follow the steps below:
1. Carefully hold the S-Video Sub card by the top
edges and lower it into an expansion slot close to
the Vidiola Pro or Premium.
2. Secure the S-Video Sub card in place by fasten-
ing its metal bracket to the computer backplane.
Section 1: Installing Vidiola
20