Orchid CDS-3110, Руководство пользователя, Страница: 9 / 20

CD-ROM User's Guide 7
Interface Card
The Interface Card connects to the CD-ROM drive
and supports 8-bit I/O, 8-bit DMA and 16-bit DMA.
The I/O, DMA and IRQ address settings may need to
be configured to avoid address conflict(s). Before
installing the Interface Card, verify the jumper set-
tings. The jumper locations are shown in the diagram
below:
Hardware Installation
Jumper Settings
Jumper Jumper Setting
P3 40-pin connector to the CD-ROM drive
JP4 Audio-In from CD-ROM
Jumper Pin Description
JP2 1-2 Optional DAC Select
JP3 2-3 Audio-In Select
A conflict
may occur if
you have
another card
in your
system using
the same
addresses as
the Interface
Card.
Resolve the
conflict by
selecting
another
available
address.
Figure: 1.3: Interface Card Jumper Locations
RCA Jack (audio-out)