6
Attaching Head Assemblies, Quick Connect Adapters, Scrub Brushes, ProGuard Orbital Backing Plates and other
accessories.
r)
Lay the polisher upside-down on your lap, a bench or flat surface. You may also use the cardboard insert removed from
inside the polisher box to support polisher and hold it in place.
s)
Fit the flat wrench around the hex nut-like adapter part of the counterweight.
t)
Hold the counterweight nut with the flat wrench (see left hand in diagram), and thread the attachment clockwise. into the
counterweight nut (see right hand).
u)
Do not over-tighten but use a firm grip for a hand tightening. Repeat the installation procedure for the other side.
Detailing Polishes and Products Selection – CTI Pro Paint Care™ Line and Other Leading Professional Products
Cyclo products are specifically formulated for the speed, action, and weight of the Cyclo Polisher. While many other professional grade machine-application
polishes are also proven to give satisfactory results, the company’s recommendation for superior results are the field-proven Genuine Cyclo CTI products
and Genuine Cyclo Accessories. For additional information on use and application of other leading professional quality polishes and products, please visit
our website’s support section at www.cyclotoolmakers.com.
Selection of the appropriate detailing chemical is essential for proper results. Many polishes can remove light scratches, and there are products specifically
designed to remove swirl-marks and holograms. There are more aggressive products and it is important to understand the difference between a polish, wax
and sealant. When using these products, read all instructions carefully and we recommend that you always use the least aggressive product and pad
combination necessary for your finish condition.
v) CTI Pro Paint Care
Heavy Compounding Gel
–
Removes scratches, heavy oxidation, orange peel, acid rain damage and other defects.
Aggressive cutting and compounding polish for use on any surface
.
w) CTI Pro Paint Care
Light Compounding Liquid
–
Eliminates hairline scratches and oxidation. Leaves a smooth surface ready for polishing. Follow
with our CTI 1 Pass Express™, then our Protective Sealant (Pro Paint Care Polish and Protective Sealant) or Finishing Wax.
x)
CTI Pro Paint Care
CTI 1 Pass Express™
–
Safely removes swirls, haze, light scratches, mild oxidation and surface contaminants while restoring
depth and brilliance. Use in a one-pass application for express polish and seal. Optionally follow with CTI Protective Sealant or CTI Finishing Wax to
lock-in the new car shine. Excellent on all painted surfaces, gel coats and clear coats.
y)
CTI Pro Paint Care
Polish and Protective Sealant
–
Our Polish and Protective Sealant is a highly protective sealant that will give your surface up to
6 months of durable protection and brilliant gloss. Shows your paint’s original new car shine. Use on all painted and gel coat surfaces.
z)
CTI Pro Paint Care
Finishing Wax
: This easy to apply cream wax will give your surface excellent UV protection and incredible brilliant gloss. Shows
your paint’s original new car shine. Use on all painted and gel coat surfaces.
Metal Polishes and Sealants – CTI Metal Polishes and Sealants Line and Other Leading Professional Products
Cyclo products are specifically formulated for use with the Cyclo Polisher and though some machine application type polishes
may give satisfactory results, we recommend that for the BEST results only the laboratory and field tested Genuine Cyclo
Accessories and products be used with the Cyclo Polisher. For additional information on use and application of other leading
professional quality polishes and products, please visit our website’s support section at
www.cyclotoolmakers.com
.
aa) CTI Metal Polish
Free Flite
TM
Cleaner-Polish
–
With one easy step this aggressive rubbing compound removes corrosion,
oxidation and surface film while also leaving a polished finish that is absolutely stunning. For quality that meets high
government standards for its aircraft, insist on Free Flite Cleaner-Polish for your stainless steel, aluminum, billet parts, chrome
and virtually every metal that needs polishing.
bb) CTI Metal Polish
Free Flite
TM
Protective Sealant
–
Specially formulated to bond to bare metal, allowing you to deoxidize the
surface and effortlessly remove finishing scratches. Plus, its protective coat helps prevent further oxidation. Great for chrome.
Use after Free-Flite Cleaner-Polish to seal and lengthen protection interval.
CTI Pad Care™ Products – CTI Pad Care pad cleaning products dissolve compounds and polishes, removes build-up
that can destroy pads. Excellent for bio-friendly wheel and tire cleaning.
cc)
CTI Pad Care High Concentrate –
Our concentrated formula is ready for dilution with water and use with a spray
applicator. Dilute then spray directly onto each pad or brush for deep cleaning. Or, mix with warm water to soak pads
and scrub brushes after use.
dd) CTI Pad Care Cleaner With Spray Applicator
– Convenient and ready for use. No mixing necessary. Simply spray
each pad, brush or other accessory 3 to 4 times for a deep cleaning. Dissolve embedded polishes and compounds,
remove wax build-up and pollutants to extend the life of pads. Perfect for clean and care of scrub brushes as well.
Guide to Genuine Cyclo Accessories
The following information will assist you in selecting the appropriate accessory for use with the Cyclo Polisher. For additional tips and application guides, please
refer to the application chart included on the back cover of this manual.
ORBOT MICRO SET-UP
8
Attaching Velcro Driver Plates and Scrub Brushes
a) Lay the ORBOT MICRO upside-down on your lap, bench or flat surface.
b) Fit the flat wrench around the hex nut-like adapter part of the counterweight.
c) Hold the counterweight nut with the flat wrench (see left hand in diagram).
Thread attachment clockwise into the counterweight nut (see right hand).
d) Do not over-tighten. Use a firm grip for hand tightening.
Repeat the installation procedure for the other side.
Genuine Velcro Driver Plates
a) Velcro driver plate (VDP) specifically designed for ORBOT.
This unique velcro system makes the pads stick to the driver.
Velcro needs replacing (generally at about 200+ hours). Simply
take off the velcro driver plate and replace with a new one.
Genuine ORBOT MICRO SuperZorb Pads
b) Our exclusive ORBOT MICRO SuperZorb Pads are one of the
primary components that help to extract an essential amount of
soil from the carpet fibers. They also play an important role to
achieve fast dry times. Designed to fit perfectly on the ORBOT
MICRO, SuperZorb Pads are washable and can be reused
hundreds of times.
Genuine ORBOT MICRO AkwaStrip Pads
c) The AkwaStrip Pad is a chemical-free stripping pad used to
achieve excellent results with just water. Used for deep cleaning
and to remove wax off of vinyl, VCT, linoleum, wood, safety
tiles, and more. An AkwaStrip Pad, used on both sides, cleans
an approximate area of 1000-2000 sq. ft (100 to 200m²),
depending on floor type and the level of wax and soil. Make
sure to thoroughly rinse with clean water after each use.
Genuine ORBOT MICRO Scrub Brush Selection Guide
Their action mimics the motion of hand-scrubbing. Simply attach two brushes so you can clean carpet,
upholstery, boat decks, tile, grout and more. The orbital motion combined with the brushes’ high
quality bristling safely cleans leather, fabric, upholstery and carpets. Each brush kneads and scrubs
vibrating loose any soil or debris. The brushes
do not spin
, which could damage fabrics and carpet.
Brushes available in 4 varieties. Each made of durable nylon bristles modified for specific applications.
Use Environ HP, our exclusive “green” encapsulation carpet cleaner to remove the tough stains.
d)
Gray Ultra Soft Upholstery Brush
(
Upholstery, Fine Carpets, Fine Interiors)
i. Flexible bristles, flagged (ends) for softness and
water-carrying
capacity.
ii. Recommended applications: Ideal for use on headliners,
leather, and other fragile upholstery
iii. Natural fiber fine carpets
GUIDE TO GENUINE ORBOT MICRO ACCESSORIES
