Calibrating and Activating Noise Floor Correction
Monitoring and Analysis Tools
9-16
Ocean TRx™ 4500 Installation and Operations Manual
8. To review the measured data, open the
Noise-Floor
menu and select
Read
Calibration
.
The
Read Noise-Floor Calibration
dialog box appears.
Figure
9-20: Read Noise-Floor Calibration Dialog Box
The curves may be presented in pairs. You can click the
Read Replace
button to view
a single curve, and the
Read Add
button to add a second curve.
9. Click
Cancel (Esc)
to close the
Read Noise-Floor Calibration
dialog box.
9.3.2
Typical Noise Floor Curves
Typical noise-floor curves for the various LNBs are displayed below for reference:
Figure
9-21: Norsat 1x07HC (10 GHz LO), NBR 50 KHz
