manualshive.com logo in svg

Orbit Research Reader 20, Руководство пользователя, Страница: 61 / 73

Поделиться
Скачать
Orbit Research Reader 20 Скачать руководство пользователя страница 61

Orbit Reader 20 

– User guide 

 

 

Version 2.10 

 
 

Orbit Research  

Confidential and Proprietary Information 

61 

 
 

g.  After upgrading the firmware, when you turn on the OR-20 for the 

first time, it will display 

the “Upgrade successful” message 

2.  If the Orbit Reader 

does not show the message “Preparing”, make sure 

you had pressed the keys in the correct sequence. Press and hold the 
Right pan lower + Dot 4 keys and without releasing them, press the power 
key to turn on the device. 

3. 

If you don’t have firmware version B0.00.00.55r02 or later, you may not 
see the messa

ges “Preparing…” properly when you start the firmware. 

Wait for around 1 minute. It will eventually 

show the message “Upgrading”. 

4.  If you are not sure at what stage of the upgrade process you are, you can 

always start from the first step. Just reset the OR-20 by pressing Dot 8 
and the Right pan down key. 

5.

 

If you do not get the message 

“Upgrade successful” after turning on the 

OR-20 for the first time, there could be a chance that you had upgraded 
the OR-20 with the same software version. You can always check the 
current firmware version from the menu. Press Up Arrow to open 
the Menu and arrow to "Ver" in the list.

 

22  Language Options (Localization) 

In Stand-Alone mode, you can change the operating language to meet your 
language needs (known as localization). The default translation table used is 
English Braille ASCII. The English table is available always within the device and 
can be used even after performing localization. Only one other language can be 
loaded at a time. 

To perform localization of the Orbit Reader 20, you can either create and upload 
the localization files or just upload existing files to the device. See the link 

http://www.orbitresearch.com/support/orbit-reader-20-support/orbit-reader-20-
localization-download/

 for instructions on how to create and upload localization 

files. 

After the localization files are uploaded, you can switch between the files for 
different language options. 

22.1  Get Localization Files  

To get the Localization files:  

1. 

Go to Orbit Support page at 

http://www.orbitresearch.com/support/orbit-

reader-20-support/orbit-reader-20-localization-download/

 and download 

the language of your choice. 

2. 

Go to the saved as file name and extract the zip file to a location that you 
will remember. 

3. 

Create a folder on the SD card called Locale. 

Содержание Reader 20










































































Отзывы:

Нет отзывов