Orbit Merret OMX 103UNI Скачать руководство пользователя | Manualshive

Страница: 2 / 96

background image

2 | USER MANUAL

OMX 103UNI

TECHNICAL SPECIFICATIONS

Instruments of the omx 103 series comply with the EU 2014/30/EU a 2014/35/EU directive and meet the
following European standards:
EN 61010-1

Electrical safety

EN 61326-1

Electrical measuring, control and laboratory equipment

- EMC requirements "Industrial Area"

IEC 980: 1993, c. 6 Seismic resistance

The device is suitable for unlimited use in agricultural and industrial areas.

SAFETY INSTRUCTIONS

Please read and observe the enclosed safety instructions carefully!

Installation, all operations, maintenance and service must be carried out by qualified personnel only

and in accordance with the enclosed information and safety regulations.

The manufacturer is not responsible for any damage caused by improper installation, configuration,
maintenance and service of the device.

The device must be installed correctly according to the actual application. Improper installation may cause
malfunction, which may result in damage to the unit or an accident.

The device uses dangerous voltage that can cause a fatal accident. The unit must be disconnected from
the power supply before starting troubleshooting (in case of malfunction) or before dismantling the unit.
For safety information, EN 61 010-1 + A2 must be observed.

When removing or inserting an electronics card, observe the safety instructions and follow the recommended
procedures. Disconnect the unit from power supply before inserting / extracting any electronics cards.

Do not attempt to repair or modify the device yourself. In case of malfunction the device must be dis-
mounted and submitted to the manufacturer for repair.

These devices should be protected by either individual or shared fuses (circuit breakers)!

The device is not intended for installation in explosive areas. Use the device only outside the explosive areas.

DANGER

WARNING

ATTENTION

RISK OF ELECTRIC SHOCK

- Disconnect all power supply and live
wires before servicing.

RISKS ASSOCIATED WITH USE

- Do not use this product in a safety
critical system.
- Do not disassemble, repair or modify
the product.
- Do not use the product outside the
recommended operating conditions.

RISKS ASSOCIATED WITH USE

- Install a 100 mA fuse

Failure to follow this instruction will
result in death or serious injury.

Failure to follow these instructions
may result in death, serious injury, or
damage to the equipment

Failure to observe this precaution
could result in personal injury or
equipment damage.

This electrical equipment may be installed, operated and maintained only by qualified personnel.
ORBIT MERRET assumes no responsibility for any consequences arising from the use of this equipment.

«
1
2
3
4
...
»

Содержание OMX 103UNI

































































































Отзывы:

Нет отзывов

Похожие инструкции для OMX 103UNI

Бренд: Daiichi Electronics Страницы: 14

Бренд: Icom Страницы: 32

Бренд: First Alert Страницы: 1

Бренд: C4Line Страницы: 2

OTX-315-HH-KF3-MS

Бренд: Linx Technologies Страницы: 10

Бренд: M-system Страницы: 2

Бренд: Dwyer Instruments Страницы: 18

Бренд: Omega Engineering Страницы: 4

Бренд: Icom Страницы: 88

Бренд: ADTRAN Страницы: 2

Бренд: ADTRAN Страницы: 2

Combo PON D2 SFP+

Бренд: ADTRAN Страницы: 4

MR HH500 FLT BT

Бренд: Cobra Страницы: 2

Бренд: Cobra Страницы: 51

Бренд: JUMO Страницы: 100

Бренд: Dynacore Страницы: 9

Бренд: Icom Страницы: 42

Бренд: Icom Страницы: 49

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды