manualshive.com logo in svg

Orbit Merret OM 402LC, Руководство пользователя

"Orbit Merret OM 402LC - высококачественное устройство для измерения орбитальной массы с возможностью подключения к ПК. Инновационный дизайн с легкостью управляется при помощи ручного управления. Получите подробное руководство по эксплуатации бесплатно на нашем сайте для загрузки: manualshive.com"

Поделиться
Скачать
background image

INSTRUCTIONS FOR USE  

OM 402LC

    

|

    

5

2.2 

Operation

The instrument is set and controlled by five control keys located on the front panel. All programmable settings of the instrument 
are performed in three adjusting modes:

LIGHT

  

Simple programming menu

 

- contains solely items necessary for instrument setting and is protected by optional number code

PROFI

  

Complete programming menu

 

- contains complete instrument menu and is protected by optional number code

USER 

 

User programming menu

 

- may contain arbitrary items selected from the programming menu (LIGHT/PROFI), which determine

 

the right (see or change)

 

- acces without password

All programmable parameters are stored in the EEPROM memory (they hold even after the instrument is switched off).

Complete instrument operation and setting may be performed via OM Link communication interface, 
which is a standard equipment of all instruments. 
The operation program is freely accessible (www.orbit.merret.cz) and the only requirement is the 

purchase of OML cable to connect the instrument to PC. It is manufactured in version RS 232 and USB and is compatible  
with all ORBIT MERRET instruments. Another option for connection is with the aid of data output RS 232 or RS 485 (without 
the need of the OML cable). 
The program OM LINK  in „Basic“ version will enable you to connect one instrument with the option of visualiza-
tion and archiving in PC. The OM Link „Standard“ version has no limitation of the number of instruments connected.

2.3 

Options

Comparators

  are assigned to monitor one, two, three or four limit values with relay output. The user may select limits regime: 

LIMIT/DOSING/FROM-TO. The limits have adjustable hysteresis within the full range of the display as well as selectable 
delay of the switch-on in the range of 0...99,9 s. Reaching the preset limits is signalled by LED and simultaneously by the 
switch-on of the relevant relay.

Data outputs

  are for their rate and accuracy suitable for transmission of the measured data for further projection or directly 

into the control systems. We offer an isolated RS232 and RS485 with the ASCII or DIN MessBus protocol.

Analog outputs

  will find their place in applications where further evaluating or processing of measured data is required in 

external devices. We offer universal analog output with the option of selection of the type of output - voltage/current. The 
value of analog output corresponds with the displayed data and its type and range are selectable in Menu. 

Measured data record

  is an internal time control of data collection. It is suitable where it is necessary to register measured 

values. Two modes may be used. FAST is designed for fast storage (40 records/s) of all measured values up to 8 000 
records. Second mode is RTC, where data record is governed by Real Time with data storage in a selected time segment 
and cycle. Up to 250 000 values may be stored in the instrument memory. Data transmis sion into PC via serial interface 
RS232/485 and OM Link.

2

INSTRUMENT DESCRIPTION

Содержание OM 402LC





































































Отзывы:

Нет отзывов

Похожие инструкции для OM 402LC

A&D UB-511 Instruction Manual preview
UB-511
Бренд: A&D Страницы: 16
A&D UB-510 Operational Manual preview
UB-510
Бренд: A&D Страницы: 50
A&D UA-852 Manuale Di Istruzioni preview
UA-852
Бренд: A&D Страницы: 20
A&D UA-767 Manuel D'Instructions preview
UA-767
Бренд: A&D Страницы: 14
A&D UA-705 Quick Start Card preview
UA-705
Бренд: A&D Страницы: 3
A&D UA-621 Operation Manual preview
UA-621
Бренд: A&D Страницы: 42
A&D UA-1030T Specification preview
UA-1030T
Бренд: A&D Страницы: 2
A&D ESSENTIAL UB-525 Instruction Manual preview
ESSENTIAL UB-525
Бренд: A&D Страницы: 48
Wahoo TICKR Trouble Shoot preview
TICKR
Бренд: Wahoo Страницы: 5
Samsung LS27A650DS/ZA User Manual preview
LS27A650DS/ZA
Бренд: Samsung Страницы: 92
Trane TruSense RMWH Installation, Operation And Maintenance Manual preview
TruSense RMWH
Бренд: Trane Страницы: 68
A&D UA-1200CNBLE Instruction Manual preview
UA-1200CNBLE
Бренд: A&D Страницы: 64
Elvid OCM-7PWV User Manual preview
OCM-7PWV
Бренд: Elvid Страницы: 17
AG Neovo 55C-TCH User Manual preview
55C-TCH
Бренд: AG Neovo Страницы: 53
YEYIAN ODRAZ 2001 Instruction Manual preview
ODRAZ 2001
Бренд: YEYIAN Страницы: 32
AOC G2460PG User Manual preview
G2460PG
Бренд: AOC Страницы: 55
Hartig+Helling MBF 8181 Operating Instructions Manual preview
MBF 8181
Бренд: Hartig+Helling Страницы: 68
Hussmann Chino SHVSS Series Installation & Operation Manual preview
Chino SHVSS Series
Бренд: Hussmann Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды