Orban OPTIMOD-FM 8600Si, Руководство по эксплуатации

Страница: 297 / 356

OPTIMOD-FM DIGITAL TROUBLESHOOTING
5-11
Q) Click “Cancel” to dismiss the “Connect [nnnn]” dialog box
R) Restart your computer. (This resets the serial port and reduces the likelihood
that you will encounter problems connecting to the 8600Si.)
S) If you see: “Error 777: The connection failed because the modem (or other
connecting device) on the remote computer is out of order”:
The “remote computer” is actually the 8600Si and it is not out of order;
you just need to set the Maximum Speed (Bits per second) to 115200. If
you already set this speed when you configured your PC ports, you
shouldn’t have this problem.
The 8600Si communicates at 115200 bps. COM ports on some older PCs
are incapable of communications at this rate and may not work reliably.
Most newer PCs use 16550-compatible UARTS, which support the 115200
bps rate.
If you do see this warning message, you can reset the Maximum BPS
Speed by accessing
P
ROPERTIES for the connection:
a) Click
S
TART
> P
ROGRAMS
> A
CCESSORIES
> C
OMMUNICATIONS
> N
ETWORK AND
D
IAL
-
UP
C
ONNECTIONS
.
b) Right click the name of your connection and access “
P
ROPERTIES
.”
c) Go to the “
G
ENERALS
”
TAB and select the “
C
ONFIGURE
”
button.
d) Set the
M
AXIMUM
S
PEED
(
BPS
)
to
115200
.
e) Select
OK
and try your connection again.
T) If you see: “Error 619: The specified port is not connected.”
Make sure the
I
NTERFACE
T
YPE on the 8600Si is correct:
a) On the 8600Si, go to Setup > Network & Remote > Pc Connec.
b) Set
PC C
ONNECT to
D
IRECT .
c) Try your connection again.
Troubleshooting Windows 2000 Modem Connect:
If you are having trouble establishing a connection, check your New Connection’s
properties to make sure they are set up correctly:
A) Click “Start > Programs > Accessories > Communications > Network and Dia-
lup Connections” to bring up the Network Connections screen.
B) In the “Network Connections” window, right-click “Optimod 8600Si - Mo-
dem” and choose “Properties.”
C) The “Properties” window opens for “Optimod 8600Si – Modem”.
D) Click the “Properties” button.
E) Select the “General” tab and make sure that “Connect Using” displays the
correct modem and port.