Orban OPTIMOD-FM 8600Si, Руководство по эксплуатации

Страница: 100 / 356

2-44
INSTALLATION ORBAN MODEL
B) Hold down the
A
UTOLOCK
soft button and turn the knob to set the desired
lockout time (if any).
You can program the lockout delay time (in hours:minutes) from 15 min-
utes to 8 hours, or
O
FF
. This is the time delay between the last access to a
local front panel control and when the front panel automatically locks it-
self out, requiring that you enter a passcode to regain front panel con-
trol of the 8600Si.
Autolock can only be turned on if at least one passcode exists with
A
LL
A
CCESS
privileges because an A
LL
A
CCESS
passcode is required to fully un-
lock the panel or to turn off the Autolock function.
C) Press the
Escape
button to leave the Security menu.
To Unlock the Front Panel:
A) On the 8600Si front panel, operate any button or the knob.
The
P
ASSCODE screen will appear.
B) Enter a passcode using the four soft buttons.
The 8600Si functionality that you can access depends on the security level
of the passcode that you entered.
After you have finished working, the panel will automatically re-lock af-
ter the time delay you set in
Setup
> S
ECURITY
> A
UTOLOCK . (You can set a
new delay at any time if you have an
A
LL
A
CCESS passcode.)
Dial-up Networking and the Passcode
When you make a Windows Dial-up Networking connection, Windows will ask you
for your passcode. To allow the connection to occur, enter any passcode that you set
at the 8600Si’s front panel. Once your PC is connected to the 8600Si, you will be able
to access the 8600Si functionality corresponding to the security level of your pass-
code.
If you have not set a passcode, leave the Windows dialog box blank.
If You Have Forgotten Your Passcode
You can reset factory defaults and wipe out security passcodes (in case you forgot
your
A
LL
A
CCESS
passcode).
A) Remove power from the 8600Si.
B) While pressing both the
Escape
and
Setup
buttons, restore power.
The Restore Defaults screen appears.
C) To gain access to the 8600Si, press the
E
RASE
A
LL
P
ASSCODES
soft button.
D) Reprogram passcodes as necessary; see To Create a Passcode on page 2-42.