Orban OPTIMOD-FM 8600, Руководство по эксплуатации

Страница: 268 / 397

3-88
OPERATION ORBAN MODEL 8600
•
any 8600 on the same network as the PC,
•
any 8600 that can be accessed through a modem connected to the PC via dial-up
networking, and,
•
any 8600 that is connected directly to the PC’s serial port(s).
Before your PC can communicate with a given 8600, you must first set up a “connec-
tion,” which is information that allows PC Remote to locate and communicate with
the 8600.
To set up a new connection:
A) Launch 8600PC.exe.
B) Create a new 8600 connection by choosing
N
EW
8600
from the
C
ONNECT
file
menu or by right clicking on the
A
LL
C
ONNECTIONS
icon in the Connections List
and selecting
N
EW
8600.
The Connection Properties dialog box opens.
C) Enter an Alias name for your 8600 (like “KABC”).
D) Leave the password field blank to prompt the user to enter a password when
initiating a connection.
Refer to Security and Passcode Programming on page 2-44.
Otherwise, enter a password to allow PC Remote to connect to your 8600
without requiring a password when the connection is initiated.
E) If you are communicating with your 8600 through a network, select the
E
THERNET
C
ONNECTION
radio button and enter the appropriate IP address, sub-
net mask, port, and gateway data. These must agree with the values you set
in step 1 on page 2-63. See also
Setting Up Ethernet, LAN, and VPN Connec-
tions on page 2-68.
F) If you are communicating via a direct serial cable connection or a modem
connection, follow the appropriate procedure described in
Appendix: Setting
up Serial Communications, starting on page 2-75.
G) Click OK after entering all required information.
To initiate communication:
Initiate communication by double-
clicking on the desired 8600 alias in
the Connections List or by selecting
the desired 8600 alias from the
C
ONNECT
drop down menu. (This
screenshot refers to the 8300 but
applies equally to the 8600.)