Orban OPTIMOD-FM 8500S, Руководство по эксплуатации

Страница: 97 / 335

OPTIMOD-FM DIGITAL INSTALLATION
2-41
B) Turn the knob until you see the passcode you want to delete.
C) Press the Next button. The Confirm Delete screen appears.
D) Press the
Y
ES
soft button to delete the passcode. Press the
NO
or
ESCAPE
buttons to abort deleting the passcode.
To Lock the Front Panel Immediately:
After you have adjusted the processor, to maximize security you will often want
to lock it immediately without waiting for the timeout. To do so:
A) Press the Setup button.
B) Press the
L
OCK
N
OW
soft button.
To Program local lockout:
A) Navigate to
Setup > S
ECURITY
.
If the front panel is already password protected, you can only access this
screen by entering a passcode with
A
LL
A
CCESS
privileges.
B) Hold down the A
UTOLOCK
soft button and turn the knob to set the desired
lockout time (if any).
You can program the lockout delay time (in hours:minutes) from 15 min-
utes to 8 hours, or
O
FF
. This is the time delay between the last access to a
local front panel control and when the front panel automatically locks it-
self out, requiring that you enter a passcode to regain front panel con-
trol of the 8500S.
Autolock can only be turned on if at least one passcode exists with
A
LL
A
CCESS
privileges because an
A
LL
A
CCESS
passcode is required to fully
unlock the panel or to turn off the Autolock function.
C) Press the Escape button to leave the Security menu.
To Unlock the Front Panel:
A) On the 8500S front panel, operate any button or the knob.
The
P
ASSCODE
screen will appear.
B) Enter a passcode using the four soft buttons.
The 8500S functionality that you can access depends on the security level
of the passcode that you entered.
After you have finished working, the panel will automatically re-lock af-
ter the time delay you set in
Setup > S
ECURITY
> A
UTOLOCK
. (You can set a
new delay at any time if you have an A
LL
A
CCESS
passcode.)