Orban OPTIMOD-AM 9300, Руководство по эксплуатации

Страница: 118 / 242

2-72
INSTALLATION ORBAN MODEL 9300
b) On your PC, click “Start / Settings / Control Panel / Phone and Modem
Options.”
c) Click the “Modems” tab.
d) Verify that your modem appears in the list available under “The following
Modems are installed.”
e) Verify that your modem is “Attached to” the correct port.
If your modem is unavailable or not attached to the correct port, you will
need to Add it. See your Windows documentation.
f) If your modem is available in the list available under “The following
Modems are installed” and it is attached to the correct port, then click
“Properties” for that modem.
g) Make sure the port speed is set at 115200.
h) Click “OK.”
B) Create a New Windows 2000 Dial-Up Connection:
a) Click “Start / Settings / Network and Dial-up Connections / Make New
Connection.”
b) Once the New Connection Wizard has opened, Click “Next.”
C) Create a New Windows 2000 Direct
Connection:
a) Launch 9300 PC Remote.
b) Choose “Connect / New 9300”
c) Give your 9300 a name (e.g.,
“KABC”) by entering this name
in the “9300 Alias” field.
d) If you wish to have 9300 PC
Remote remember the password
for this Optimod, enter the
password in the “Password“
field.
e) Select “Serial Connection.”
f) Click the “Add” button.