Manual for Tire Pressure Monitoring Systems, TPMS
11/21
Standard Front/Rear Tire Pressure Setting
Step
Operation process
Photograph
1
Pressing the
set key
for over 3 seconds can change to the
front tire standard pressure set up mode.
【
Set
】
Key
2
The wireless receiver and
d
isplay unit will show the preset front
tire standard pressure default (34 psi / 230 kPa / 2.3 bar).
3
By pressing the
function key
once, the psi value will add 1
unit; and the unit value will return to 20 psi when it has reached
48 psi. ( the kPa value will add 10 units; and the unit value will
return to 140 kPa when it has reached 330kPa / the bar value
will add 0.1 units; and the unit value will return to 1.4bar when
it has reached 3.3 bar) The system will use this setting as the
standard value for low tire pressure monitoring, which means
when the tire has deflated to a pressure value lower than this
setting, the system will automatically start to warn the driver.
【
Function
】
Key
4
As for the preset standard value 34psi / 230kpa for tire
pressure monitoring. High tire pressure monitoring which
means when tire pressure has reached 51psi or 1.5 times of
the original standard value (the initial preset value is 345kPa or
3.5 bar).
For low tire pressure monitoring which means when tire
pressure has reached 27psi or 0.8 times of the original
standard value (the initial present value is 184 kPa or 1.8bar).
5
Press the
set key
to complete the front tire pressure warning
value setup mode. The system will automatically enter the rear
tire pressure set up mode.
【
Set
】
Key
6
Set up rear tire standard pressure value by using the same
steps 1~5 from front tire pressure warning value set up
mode.
。
